Site Name
- siteinfo-Ex001
Technician
- carla
Inspection Date
RTU/Housing Type
hutch
Module Type
plugin
Module S/N
345rf345
Motherboard S/N
45dgwe454
Analog Bd S/N
dfgsdr34534
Firmware
smokin
Aerial Type
axial
Rt Type
open
R/t S/N
456erg
Check the battery condition
ok
Check power supply voltage, record voltage
ok
Load test system with electronic load for 5 secs, record voltable (limit 11.5V)
ok
Test Charger and record result
pass
Load test battery with electronic load for 1 min, record voltage (limit 11.5V)
ok
Reconnect battery and monitor battery voltage rise
44
Battery installation date
Check aerial, pole and coax cable for damage
ok
Enclosure free of rust/corrosion
ok
Equipment not damaged
ok
Free from any insect or vermin infestation
ok
Check the radio operation
ok
Measure power output
34
Check the Standing Wave Ratio (SWR)
34
Attach laptop and check unit communicates with I/O
ok
Test each input to the telemetry system by starting and stopping equipment
ok
Activate accessible inputs and test instruments or relay inputs at telemetry terminals
ok
All site outputs are transmitted to the laptop computer
ok
Test site alarm output is transmitted
ok
Monitor multiplexer operation and interface with the computer systems
ok
Upgrade Abbey systems, DATRAN and Intouch software
ok
Carry out other tasks as directed by engineer
ok
Check base computers, printers, modems and wiring for damage and wear
ok
Test appropriate applications for correct functionality
ok
Check hard disk
ok
Check landline communications
ok
Check aerial, pole and coax cable
ok
Radio free from infestation
ok
Check radio operation
ok
Measure power output
ok
Check the Standing Wave Ratio
ok
Check power supply when transmitting
ok
Overall Checked
No